I. Introduction to Standards: GB/T 35559:2017 specifies the technical requirements, test methods, quality assessment procedures and marking, packaging, transportation and storage of portable power supplies for portable digital devices. . Especially for the rated capacity, rated energy, environmental adaptability, safety regulations. It will provide a more accurate technical basis for follow-up product design and R&D, supervision, random inspection and transportation identification.
In accordance with the requirement of the standardization law, in order to harmonize with the requirements of mandatory national standards, in the mobile power standard GB/T 35590, the relevant safety requirements respectively cite the other two mandatory national standards - —GB 31241-2014 “Safety Requirements for Lithium-ion Batteries and Batteries for Portable Electronic Products” and GB4943.1-2011 “ Information Technology Equipment Safety Part 1: General Requirements”. As a core component, lithium-ion batteries used in portable mobile power supplies need to meet the requirements of GB 31124-2014, and the overall safety of mobile power supplies must comply with GB 4943.1-2011.
In the standard, the definition of various terms is clarified. At the same time, specific requirements for various aspects of mobile power are specified, including appearance identification, performance, safety protection, safety, and electromagnetic compatibility. Environmental adaptability, limited use of restricted substances, etc. For example, mobile power cycle life should not be less than 300 times, the product must have overshoot protection, over discharge protection, short circuit protection, overload protection, misoperation protection.
Second, the scope of application of the standard:
1. A mobile power source is a combination of a battery or a battery pack, a corresponding circuit, and a housing, which can provide a stable DC output. The non-stationary power supply system, and no more than 18kg of predetermined power that can be carried by the user.
2. The input voltage for portable digital devices is not more than 250V, the output DC voltage is not more than 60V, the single-port output current is not more than 5A, and the mobile power with wired output mode is used.
3. 28 test items specified in the standard:
Appearance and logo
interface
effective output capacity< Br/>
Capacity retention
cycle life
conversion efficiency
output voltage
brightness And noise
Power adaptability in charged state overcharge protection
overdischarge protection
short circuit protection
Overload protection
br/>misoperation
complete electrical safety
batteries and batteries
Material Flame Retardation
Strain Relief
Restricted Power
High Temperature Charge/Discharge
radio disturbance
Immunity
Constant damp heat
Temperature cycling
Vibration
Collision
Free fall
Restricted substance limit
